Home & DIY / calculator
Deck calculator
Estimate decking boards from deck size, board length and width, installed gaps, and waste. Supports metres and feet; framing is separate.
Calculator
Calculator
Enter deck and board dimensions.
Estimate deck area and boards while keeping cutting loss separate from the geometric area.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Unit system
- Metric (m, m², m³)
- Deck length (m)
- 4
- Deck width (m)
- 3
- Board width (m)
- 0.14
- Board length (m)
- 3
- Gap between boards (m)
- 0.005
- Waste and cutting loss (%) (optional)
- 10
Calculation breakdown
Deck area is length × width. Boards run along the deck length. Rows are calculated across the width using board width plus gap; boards per row are based on board length. Waste is then applied and the count rounded up.
- Deck area
- 12.00 m²
- Mathematical surface area.
- Area including waste
- 13.20 m²
- Includes your cutting-loss allowance.
Example result
Approximate boards
47
Assumes boards run along the deck length and includes the installed gap and waste.
How to interpret the result
The board count uses rows across the width, the installed board gap, boards per row, and waste. It does not determine framing, fasteners, joins, or structural compliance.
How to use this calculator
- Choose metres or feet and enter the rectangular deck length and width.
- Enter actual board length and width plus the installed gap; boards run along deck length.
- Set waste and calculate surface boards before preparing the framing and cut list.
How it works
Formula
Deck area is length × width. Boards run along the deck length. Rows are calculated across the width using board width plus gap; boards per row are based on board length. Waste is then applied and the count rounded up.
How many decking boards do I need?
Count board rows across the deck width and whole boards per row along the deck length, then add waste. Board length matters even when surface area stays the same. The estimate does not optimize offcut reuse or specify safe butt-joint support.
What this calculator does
Enter the deck footprint and board dimensions to distinguish the geometric surface from the boards you may need to order.
Who this is useful for
People estimating surface boards for a simple rectangular deck before developing a full structural plan.
Inputs you will need
Required or selected inputs
- Unit system
- Deck length (m)
- Deck width (m)
- Board width (m)
- Board length (m)
- Gap between boards (m) — Use the installed gap recommended for the board material.
Optional inputs
- Waste and cutting loss (%) (optional)
Assumptions
- The deck is rectangular and boards run along its entered length.
- Waste represents cuts and damaged boards.
- Joists, fasteners, stairs, framing, and layout direction are excluded.
Limitations
- Board layout, butt joints, picture framing, stairs, and framing design can change quantities.
- This is not structural engineering advice.
Useful next steps
Plan rise and run for a separate straight flight of steps with Stair calculator.
Estimate cubic lumber volume for your separate piece list with Lumber calculator.
If a supplier quotes lumber by board foot, use Board foot calculator.
Plan a separate straight boundary fence with Fence calculator.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Does this size the framing?
No. It estimates surface boards only.
Why include waste?
Boards need cutting and damaged pieces may need replacement; the allowance is not a guaranteed rule.
Keep going