Home & DIY / calculator

Lumber calculator

Calculate per-piece and total lumber volume from actual length, width, thickness, quantity, and waste. Enter metres or feet for cubic results.

Calculator

Calculator

Enter lumber size and quantity.

Calculate piece and total lumber volume with an explicit cutting-loss allowance.

Units
Lumber dimensions
Waste

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Unit system
Metric (m, m², m³)
Piece length (m)
3
Piece width (m)
0.1
Piece thickness (m)
0.05
Number of pieces (m)
20
Waste and cutting loss (%) (optional)
10

Calculation breakdown

Piece volume is length × width × thickness. Total volume is piece volume × quantity, then the waste allowance is added.

Piece volume
0.015 m³
Volume of one piece.
Total geometric volume
0.300 m³
Piece volume multiplied by quantity.

Example result

Volume including waste

0.330 m³

Cutting-loss planning estimate.

How to interpret the result

The result describes geometric material volume for the dimensions and quantity entered. Use the allowance for cutting loss, but do not treat it as a structural rating or a supplier's nominal-size conversion.

How to use this calculator

  1. Select metres or feet and enter the actual piece length, width, and thickness.
  2. Enter a whole piece count and the cutting-loss allowance.
  3. Calculate per-piece, total, and adjusted volume; calculate differing piece sizes separately.

How it works

Formula

Piece volume is length × width × thickness. Total volume is piece volume × quantity, then the waste allowance is added.

How do I calculate lumber volume?

Multiply actual length, width, and thickness for one piece, then multiply by piece count and add any cutting allowance. Nominal size names are not measured dimensions. This cubic-volume estimate does not produce a cut list or a structural strength rating.

What this calculator does

Enter the finished dimensions and quantity of pieces to see geometric lumber volume separately from waste.

Who this is useful for

Woodworkers and project planners comparing the geometric volume of repeated rectangular lumber pieces.

Inputs you will need

Required or selected inputs

  • Unit system
  • Piece length (m)
  • Piece width (m)
  • Piece thickness (m)
  • Number of pieces (m)

Optional inputs

  • Waste and cutting loss (%) (optional)

Assumptions

  • Dimensions describe rectangular pieces.
  • Quantity is a count of pieces.
  • Waste represents cutting loss and unusable defects, not a supplier-specific yield.

Limitations

  • Nominal versus actual dimensions, grade, moisture, kerf, and supplier packaging are not inferred.
  • This does not replace a cut list or structural design.

Useful next steps

For lumber priced in board feet instead of cubic units, use Board foot calculator.

Estimate a rectangular deck's surface board count with Deck calculator.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Does this calculate board feet?

It reports cubic units. The separate Board Foot Calculator reports lumber volume in board feet using inches and feet or centimetres and metres.

Are nominal lumber sizes supported?

Enter the actual dimensions you intend to use for the estimate.

Keep going