Home & DIY / calculator
Stair calculator
Plan equal risers, treads, run, and step pitch from total rise, maximum riser, and tread going. Enter metres or feet for a straight flight.
Calculator
Calculator
Plan a straight flight of stairs.
Use a maximum riser height and tread going. The upper floor is the final landing, so treads = risers − 1.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Unit system
- Metric (m, m²)
- Total rise (m)
- 2.8
- Maximum riser height (m)
- 0.18
- Tread going (horizontal depth) (m)
- 0.28
Calculation breakdown
Risers = ceil(total rise ÷ maximum riser). Actual riser = rise ÷ risers. Treads = risers − 1. Run = treads × going. Step pitch = atan(actual riser ÷ going).
- Risers
- 16
- Actual riser height
- 0.175 m
- Treads
- 15
- Horizontal run
- 4.2 m
Example result
Step pitch angle
32.01°
atan(actual riser / tread going), not a code-compliance approval.
How to interpret the result
Risers = ceil(total rise ÷ maximum riser). Actual riser = rise ÷ risers. Treads = risers − 1. Run = treads × going. Step pitch = atan(actual riser ÷ going). Building codes vary by jurisdiction. Headroom, landings, nosings, rails, supports, and structural design are not evaluated. This is not code-compliance approval.
How to use this calculator
- Select metres or feet and enter total vertical rise.
- Enter a maximum riser and tread going in the same length unit.
- Calculate equal risers, tread count, run, and pitch; check headroom, landings, and local requirements separately.
How it works
Formula
Risers = ceil(total rise ÷ maximum riser). Actual riser = rise ÷ risers. Treads = risers − 1. Run = treads × going. Step pitch = atan(actual riser ÷ going).
How do I calculate stair rise and run?
Round total rise ÷ maximum riser up to a whole riser count, then divide rise by that count for equal risers. With the upper floor as the landing, treads = risers − 1. Step pitch uses one riser and one going; it does not assess local building requirements.
What this calculator does
Enter total rise, maximum riser height, and tread going to divide a straight flight into equal steps.
Who this is useful for
DIY planners comparing a straight flight's rise and available run before checking a design against local building requirements.
Inputs you will need
Required or selected inputs
- Unit system
- Total rise (m)
- Maximum riser height (m)
- Tread going (horizontal depth) (m)
Assumptions
- The upper floor is the final landing; at least two risers are required. All linear inputs use metres or feet.
Limitations
- Building codes vary by jurisdiction. Headroom, landings, nosings, rails, supports, and structural design are not evaluated. This is not code-compliance approval.
Useful next steps
Estimate a separate rectangular stair base or landing volume with Concrete calculator.
Check the rectangular space available for a landing with Room area calculator.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Why is there one fewer tread than riser?
The upper floor serves as the final landing. The flight therefore has one fewer constructed tread than riser.
Keep going