Home & DIY / calculator

Board foot calculator

Calculate board feet per board and in total from thickness, width, length, and quantity. Supports inches and feet or centimetres and metres.

Calculator

Calculator

Calculate lumber board footage.

Imperial: thickness and width in inches, length in feet. Metric: thickness and width in centimetres, length in metres. Use actual measured sizes.

Boards

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Unit system
Imperial (in, ft)
Thickness (in)
1
Width (in)
6
Length (ft)
8
Quantity
10

Calculation breakdown

Board feet per board = thickness(in) × width(in) × length(ft) ÷ 12. Total board feet = per-board value × quantity.

Board feet per board
4

Example result

Total board feet

40

Volume measure; no nominal-size or supplier price assumptions.

How to interpret the result

Board feet per board = thickness(in) × width(in) × length(ft) ÷ 12. Total board feet = per-board value × quantity. This measures actual geometric lumber volume. Nominal dimensions, grading, moisture, cutting loss, and supplier pricing conventions are not inferred.

How to use this calculator

  1. Choose inches for thickness and width with feet for length, or centimetres with metres in metric mode.
  2. Enter actual board dimensions and a whole quantity.
  3. Calculate board feet per board and total; check supplier dimension and pricing conventions.

How it works

Formula

Board feet per board = thickness(in) × width(in) × length(ft) ÷ 12. Total board feet = per-board value × quantity.

What is a board foot and how do I calculate it?

A board foot measures lumber volume and equals 144 cubic inches. Board feet = thickness in inches × width in inches × length in feet ÷ 12. Multiply by board count for the total, and confirm whether the seller prices measured or nominal sizes.

What this calculator does

Enter thickness, width, length, and quantity to measure lumber volume in board feet. Metric sizes are normalized to inches and feet first.

Who this is useful for

Woodworkers comparing lumber sold by board foot using measured dimensions, board count and an explicit cutting allowance.

Inputs you will need

Required or selected inputs

  • Unit system
  • Thickness (in)
  • Width (in)
  • Length (ft)
  • Quantity

Assumptions

  • Imperial thickness and width use inches and length uses feet; metric thickness and width use centimetres and length uses metres.

Limitations

  • This measures actual geometric lumber volume. Nominal dimensions, grading, moisture, cutting loss, and supplier pricing conventions are not inferred.

Useful next steps

For cubic timber volume with a cutting allowance, use Lumber calculator.

Estimate decking surface board counts with Deck calculator.

References

NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Should I use actual or nominal dimensions?

Use measured dimensions for geometric volume. A seller may use different nominal or pricing conventions; confirm those separately.

Keep going