Technology / calculator

Voltage Drop Calculator

Estimate resistive DC cable voltage drop from current and explicit resistance or conductor resistance per metre.

Calculator

Calculator

Estimate resistive DC voltage drop.

Enter total path resistance, or resistance per metre and one-way length. The round-trip mode assumes equal outgoing and return conductors. No gauge tables or code-compliance assessment are used.

DC circuit

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Resistance input
Resistance per metre and cable length
Current (A)
10
Supply voltage (V)
12
Conductor resistance (Ω/m)
0.005
One-way cable length (m)
10
Length assumption
DC round trip — two equal conductors

Calculation breakdown

Vdrop = I × Rtotal. Round-trip Rtotal = resistance per metre × 2 × one-way length. Vload = Vsupply − Vdrop; drop percent = Vdrop/Vsupply × 100.

Total modeled resistance
0.1 Ω
Voltage drop
1 V
Drop percentage
8.333333%

Example result

Voltage at load

11 V

Ideal supply minus modeled resistive path drop.

How to interpret the result

Drop is the modeled voltage loss along the entered resistive path. Load voltage subtracts that loss from the supply, and drop percent compares it with supply voltage. Single-conductor mode omits return-path loss and other components.

How to use this calculator

  1. Choose total path resistance or resistance per metre with one-way length.
  2. Enter current and supply voltage. For a length-based estimate, explicitly choose round-trip or single-conductor contribution.
  3. Calculate drop, drop percentage and modeled load voltage; verify actual conductor specifications separately.

How it works

Formula

Vdrop = I × Rtotal. Round-trip Rtotal = resistance per metre × 2 × one-way length. Vload = Vsupply − Vdrop; drop percent = Vdrop/Vsupply × 100.

Should I double the cable length?

Round-trip mode doubles the one-way length automatically. Enter one-way length once; if entering explicit total resistance, include the full outgoing and return path yourself.

What this calculator does

Estimate how much voltage is lost along a resistive DC conductor using current and the path's entered resistance.

Inputs you will need

Some inputs appear only for the operation or shape you select.

Required or selected inputs

  • Resistance input
  • Current (A)
  • Supply voltage (V)
  • Total path resistance (Ω)
  • Conductor resistance (Ω/m)
  • One-way cable length (m)
  • Length assumption

Assumptions

  • Round-trip mode assumes identical outgoing and return conductors. Single-conductor mode models only that conductor contribution; explicit total resistance includes the entire entered path.

Limitations

  • Resistance must reflect actual material, temperature and connections. No wire-gauge lookup, AC impedance, code compliance or design advice is supplied. Drops above the supply are rejected.

Useful next steps

Check the underlying voltage, current and resistance relationship with Ohm's Law Calculator.

References

OpenStax: Ohm's law — Voltage, current and resistance for ohmic conductors. Cable calculations use entered path resistance, without gauge or safety assumptions.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Does the result prove code compliance?

No. It only applies entered resistance and current to an ideal path model. Actual installation, conductor temperature, protection and local requirements need independent verification.

Keep going