Technology / calculator
Resistor Calculator
Read four- and five-band resistor values, multipliers and manufacturing tolerances from named color bands.
Calculator
Calculator
Read four- or five-band resistor markings.
Choose named colors in reading order. Four bands use two significant digits; five use three. The final tolerance band describes nominal manufacturing variation, not measurement accuracy.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Band count
- 4 bands
- First digit
- yellow
- Second digit
- violet
- Multiplier band
- red
- Tolerance band
- gold (±5%)
Calculation breakdown
Four bands: R = (10d1 + d2) × multiplier. Five bands: R = (100d1 + 10d2 + d3) × multiplier. Nominal bounds = R × (1 ± tolerance/100).
- Multiplier
- ×100
- Tolerance
- ±5%
- Nominal range
- 4,465–4,935 Ω
- Manufacturing tolerance, not measured accuracy.
Example result
Nominal resistance
4,700 Ω
How to interpret the result
Nominal resistance comes from the significant digits and multiplier. The tolerance percentage produces the stated nominal minimum and maximum; it does not quantify meter accuracy, temperature drift or actual measured resistance.
How to use this calculator
- Choose four bands for two significant digits or five bands for three.
- Select each significant-digit color in reading order, followed by the multiplier and tolerance colors.
- Read nominal resistance and tolerance bounds; these describe manufacturing variation, not measured accuracy.
How it works
Formula
Four bands: R = (10d1 + d2) × multiplier. Five bands: R = (100d1 + 10d2 + d3) × multiplier. Nominal bounds = R × (1 ± tolerance/100).
How is a five-band resistor different?
Five bands use three significant digits before the multiplier and tolerance. Four bands use two; yellow, violet, red, gold yields 4,700 Ω ±5%.
What this calculator does
Decode the digit, multiplier and tolerance bands on a four- or five-band resistor before checking its circuit behaviour.
Inputs you will need
Some inputs appear only for the operation or shape you select.
Required or selected inputs
- Band count
- First digit
- Second digit
- Third digit
- Multiplier band
- Tolerance band
Assumptions
- Read bands from the first significant digit toward the tolerance band. Gold and silver multipliers are 0.1 and 0.01 respectively.
Limitations
- Common four- and five-band codes only; first digit cannot be black. Temperature coefficients, zero-ohm jumpers and special manufacturer markings are excluded. Tolerance is not measurement accuracy.
Useful next steps
Use the decoded resistance in a DC voltage/current calculation with Ohm's Law Calculator.
References
Vishay: four- and five-band resistor color chart — Manufacturer digit, multiplier and tolerance mappings. Tolerance describes nominal manufacturing variation, not measurement accuracy.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
What do gold and silver multiplier bands mean?
Gold multiplies the significant digits by 0.1 and silver by 0.01. In the separate tolerance position, gold means ±5% and silver means ±10%.
Keep going