Technology / calculator

Ohm's Law Calculator

Solve voltage, current, resistance and power from any two known quantities for an ideal resistive DC circuit.

Calculator

Calculator

Solve a resistive circuit from two quantities.

Select two known quantities in order, with explicit units. Uses nonnegative DC magnitudes and positive resistance; excludes AC impedance and power factor.

Known quantities

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Known pair (first, second)
Voltage, resistance
First known quantity
12
First quantity unit
V
Second known quantity
6
Second quantity unit
Ω

Calculation breakdown

V = IR; P = VI = I²R = V²/R. For (V,P), I=P/V; for (I,P), V=P/I; for (R,P), V=√(PR).

Voltage
12 V
Resistance
6 Ω
Power
24 W

Example result

Current

2 A

How to interpret the result

The four outputs are a consistent ideal resistive-circuit solution in volts, amperes, ohms and watts. Entered engineering prefixes change the numeric scale before solving. These calculated values are not component measurements or a rating check.

How to use this calculator

  1. Choose the known pair of voltage, current, resistance or power.
  2. Enter first and second quantities in the displayed order and choose their engineering units.
  3. Calculate all four quantities for the ideal resistive DC model; review the electrical safety notice.

How it works

Formula

V = IR; P = VI = I²R = V²/R. For (V,P), I=P/V; for (I,P), V=P/I; for (R,P), V=√(PR).

Can I enter milliamps or kiloohms?

Yes. Select mA or kΩ explicitly; values normalize to canonical units before calculation. For 12 V and 6 Ω, current is 2 A and power is 24 W.

What this calculator does

Enter two known electrical quantities to solve the remaining voltage, current, resistance and power in an ideal DC resistor.

Inputs you will need

Required or selected inputs

  • Known pair (first, second)
  • First known quantity
  • First quantity unit
  • Second known quantity
  • Second quantity unit

What to check before using the result

The equations assume an ideal resistive DC relationship. Resistance can change with temperature, and AC circuits with reactance require an impedance model. Calculated power is electrical dissipation, not a component's safe power rating. Choose hardware from its specifications and operating conditions rather than treating the result as a wiring approval.

Assumptions

  • Known values are nonnegative magnitudes with positive resistance. Engineering prefixes normalize to volts, amperes, ohms and watts.

Limitations

  • Zero voltage or current can be solved with known resistance; pairs without resistance need positive values for a unique solution. AC reactance, impedance, power factor and component heating are excluded.

Useful next steps

Read a resistor's nominal resistance and tolerance from its bands with Resistor Calculator.

References

OpenStax: Ohm's law — Voltage, current and resistance for ohmic conductors. Cable calculations use entered path resistance, without gauge or safety assumptions.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Can this calculate AC impedance?

No. It models nonnegative DC magnitudes and ideal resistance. AC reactance, phase angle and power factor require a different circuit model.

Keep going