Converters / utility
Unit converter
Convert metric and US units for length, weight, temperature, area, volume and more. Swap units or choose a common pair, then copy your result.
Calculator
Calculator
Choose units and enter a value.
Every unit is explicitly named and symbolized. Temperature uses Celsius, Fahrenheit, and Kelvin formulas rather than a single scale factor.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Conversion group
- Length
- Convert from
- Meter (m)
- Convert to
- International foot (ft)
- Value
- 1
Calculation breakdown
For linear conversions, target value = source value × source-to-base factor ÷ target-to-base factor. For example, 1 inch = 2.54 cm and 1 pound = 0.45359237 kg. Area and volume need squared and cubed length factors. Temperature uses offsets: °F = °C × 9/5 + 32 and K = °C + 273.15. Fuel consumption and distance-per-fuel use a reciprocal: US mpg = 235.214583 ÷ (L/100 km), approximately; Imperial mpg uses a different gallon.
Example result
International foot (ft)
3.28084
1 m converted without changing the underlying quantity.
How to interpret the result
The converted value represents the same quantity in the target unit. Keep the displayed precision in mind before copying the result into work that requires specific tolerances.
Common m → ft conversions
| m | ft |
|---|---|
| 1 | 3.28084 |
| 10 | 32.808399 |
| 100 | 328.08399 |
How to use this calculator
- Select the quantity type and units, or use a common-pair shortcut. Swap units reverses the direction while keeping the entered value.
- Enter the measurement in the source unit; check the named definitions, especially gallons, cups, and binary data units.
- Convert and retain the target unit when copying the result.
How it works
Formula
For linear conversions, target value = source value × source-to-base factor ÷ target-to-base factor. For example, 1 inch = 2.54 cm and 1 pound = 0.45359237 kg. Area and volume need squared and cubed length factors. Temperature uses offsets: °F = °C × 9/5 + 32 and K = °C + 273.15. Fuel consumption and distance-per-fuel use a reciprocal: US mpg = 235.214583 ÷ (L/100 km), approximately; Imperial mpg uses a different gallon.
How do I convert between measurement units?
For length, area, volume, mass, pressure, torque, and data, multiply by the source factor and divide by the target factor. Area and volume factors are squared and cubed; temperature needs scale offsets. Select US or metric kitchen units explicitly rather than assuming every cup has the same volume.
What this calculator does
Choose from 17 quantity groups, including length, mass, temperature, area, volume, pressure, torque, energy, power, angle, speed, fuel economy, force, density, duration, data size and network speed. Metric units use powers of ten; US liquid and international foot/pound definitions are named explicitly. A US cup is not a metric cup, and KB (1,000 bytes) is not KiB (1,024 bytes). Image pixels need your supplied PPI.
Who this is useful for
Anyone translating a measurement into another supported unit for cooking, DIY, study, or everyday comparison.
Inputs you will need
Some inputs appear only for the operation or shape you select.
Required or selected inputs
- Conversion group
- Convert from
- Convert to
- Value
- Pixel density (PPI) — Required for image pixels. 96 is an example, not a physical screen assumption.
What to check before using the result
Select the physical quantity before the unit pair. Square and cubic conversions use squared and cubed length factors, so a length factor alone is wrong for area or volume. Temperature conversion needs an offset. Converting units adds no measurement accuracy; keep the original measurement's tolerance when you reuse the displayed digits.
Assumptions
- Units are explicitly named with their symbols and descriptions.
- US liquid gallon is used for gallons.
- Weight uses mass units such as kilogram, gram, pound, and ounce.
Limitations
- Rounded display values may omit digits that are not visible at the chosen precision.
- The converter does not infer units from free text.
- Regional definitions are excluded unless explicitly named; image pixels require a supplied positive PPI and do not imply a universal physical size.
Useful next steps
For a focused thermometer-reading conversion with common temperatures, use Celsius to Fahrenheit.
For a measured floor area and a common-area comparison table, use Square Feet to Square Metres.
For a focused comparison of kitchen cups and spoons, use Cooking measurement converter.
For decimal and binary file quantities, use File size converter.
References
NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Which temperature formulas are used?
Celsius, Fahrenheit, and Kelvin use their correct scale offsets and ratios. For example, Celsius to Fahrenheit is °F = °C × 9/5 + 32.
Why are some digits rounded?
Results show a sensible number of decimal places while retaining more precision for very small or very large values. The underlying calculation uses full JavaScript number precision.
Can I convert area or volume units?
Yes. Area and volume units use their correct squared or cubed scale factors, such as square feet to square meters and cubic feet to cubic meters.
Keep going