Converters / utility
Square Feet to Square Metres
Convert square feet to square metres with the exact area factor. Reverse conversion, common floor areas and squared-unit explanations included.
Calculator
Calculator
Convert the entered value.
Convert an already measured floor or surface area. Square units use the squared length factor; a length cannot be treated as an area.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Value in ft²
- 100
- Conversion direction
- ft² → m²
Calculation breakdown
square metres = square feet × 0.09290304; square feet = square metres / 0.09290304. The area factor is (0.3048)², rather than the linear metre-per-foot factor.
- Entered quantity
- 100 ft²
Example result
Converted value (m²)
9.290304
Arithmetic retains full precision. Ordinary values show up to six decimal places, large values up to eight, and extremes use scientific notation.
How to interpret the result
The result changes area units. It does not reconcile differences in how a property was measured.
Common conversions: ft² → m²
| ft² | m² |
|---|---|
| 1 | 0.092903 |
| 10 | 0.92903 |
| 100 | 9.290304 |
| 250 | 23.22576 |
| 500 | 46.45152 |
| 1000 | 92.90304 |
| 2000 | 185.80608 |
How to use this calculator
- Determine the measured area in ft² before using this converter.
- Enter it and convert to m².
- Swap to compare a metric area with a square-foot listing.
How it works
Formula
square metres = square feet × 0.09290304; square feet = square metres / 0.09290304. The area factor is (0.3048)², rather than the linear metre-per-foot factor.
How much is 100 square feet in square metres?
100 ft² equals 9.290304 m².
What this calculator does
Enter an area in square feet to obtain square metres. One square foot equals exactly 0.09290304 square metres, using the square of the international foot.
Who this is useful for
Comparing floor plans, property listings and surface coverage in metric and imperial area units.
Inputs you will need
Required or selected inputs
- Value in ft²
- Conversion direction
Assumptions
- The starting number already measures area, not width or length.
- The square foot is based on the international foot.
Limitations
- This page does not calculate an area from dimensions or account for irregular shapes.
- Usable, gross and advertised property areas can have different measurement conventions.
Useful next steps
If you have shape dimensions instead of an area, use Area Calculator.
To measure a room’s floor area from dimensions, use Room area calculator.
For square yards and other area units, use Unit converter.
References
NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Why can I not multiply square feet by 0.3048?
0.3048 converts a length. Area has two length dimensions, so its conversion factor must be squared.
Keep going