Math / calculator

Area Calculator

Calculate area for seven shapes from shape-specific dimensions in metres or feet. Compare square metres and square feet with clear height and semiaxis definitions.

Calculator

Calculator

Calculate area for a selected shape.

Select a shape, then enter its required dimensions in metres or feet. Triangle and parallelogram height must be perpendicular; ellipse inputs are semiaxes, not full diameters.

Shape and dimensions

Rectangle: length; square: side; triangle/parallelogram: base; circle: radius; trapezoid: first parallel base; ellipse: semiaxis a.

Rectangle: width; triangle/parallelogram: perpendicular height; trapezoid: second parallel base; ellipse: semiaxis b.

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Shape
Rectangle
Length unit
Metres (m)
First dimension (m)
4
Second dimension (m)
3

Calculation breakdown

Rectangle A=lw; square A=s²; triangle A=bh/2; circle A=πr²; trapezoid A=(a+b)h/2; parallelogram A=bh; ellipse A=πab, where a and b are semiaxes. Dimensions normalize to metres before converting area to m² and ft².

Shape
rectangle
Area in square metres
12 m²
Area in square feet
129.166925 ft²

Example result

Calculated area

12 m²

How to interpret the result

The primary area uses your selected unit system; both m² and ft² describe the same geometric quantity. Check whether the supplied height is perpendicular and ellipse dimensions are semiaxes before using the result for a real measurement.

How to use this calculator

  1. Select one of the seven shapes and choose metres or feet for every dimension.
  2. Enter the indicated sides, bases, perpendicular height or semiaxes; fields change with the shape.
  3. Calculate and compare m² with ft², keeping linear inputs distinct from square-unit outputs.

How it works

Formula

Rectangle A=lw; square A=s²; triangle A=bh/2; circle A=πr²; trapezoid A=(a+b)h/2; parallelogram A=bh; ellipse A=πab, where a and b are semiaxes. Dimensions normalize to metres before converting area to m² and ft².

How do I calculate area for different shapes?

Select the shape and enter its relevant lengths. Rectangle area multiplies length and width, triangle area halves base times perpendicular height, and ellipse area is pi times its two semiaxes. Results use square metres or square feet rather than ordinary length units.

What this calculator does

Area is a two-dimensional measurement. Choose a shape to reveal only its required dimensions. A triangle or parallelogram needs perpendicular height; an ellipse uses half-axis lengths. The output distinguishes square units from the linear input units.

Who this is useful for

Learners and planners choosing the appropriate area formula for a flat standard shape and comparing metric with imperial square units.

Inputs you will need

Some inputs appear only for the operation or shape you select.

Required or selected inputs

  • Shape
  • Length unit
  • First dimension (m) — Rectangle: length; square: side; triangle/parallelogram: base; circle: radius; trapezoid: first parallel base; ellipse: semiaxis a.
  • Second dimension (m) — Rectangle: width; triangle/parallelogram: perpendicular height; trapezoid: second parallel base; ellipse: semiaxis b.
  • Perpendicular trapezoid height (m)

Assumptions

  • Shapes are flat, ideal geometric figures and all entered dimensions use the selected length unit.
  • The trapezoid bases are parallel, and height is perpendicular to the base; ellipse a and b are semiaxes rather than diameters.

Limitations

  • Irregular outlines, polygons from coordinates and three-dimensional surface area are not solved.
  • Measured dimensions and π-based calculations use floating-point arithmetic; area conversion requires a squared length factor, not a linear factor.

Useful next steps

Find triangle area when sides and angles are known instead of perpendicular height with Triangle Calculator.

Combine rectangular room sections for a practical floor plan with Room area calculator.

Add diameter and circumference to a circle area result with Circle calculator.

To convert an already measured floor area between square units, use Square Feet to Square Metres.

References

NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Can I use a sloping side as triangle height?

Only if that side is perpendicular to the chosen base. Otherwise use the actual perpendicular height, or solve the triangle from sides and angles with the Triangle Calculator.

Keep going