Converters / calculator

Length Converter

Convert physical metres, kilometres, centimetres, millimetres, feet, inches and miles using established shared length definitions.

Calculator

Calculator

Convert between selected units.

Physical length units use international foot, inch and mile definitions. All selected units represent the same linear dimension. Image pixels require separate PPI and stay in the dedicated pixel tool. This page does not infer screen density, map routes or area scaling.

Quantity and units

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Source value
1
Source unit
Meter (m)
Target unit
International foot (ft)

Calculation breakdown

length target = length × source metre factor ÷ target metre factor.

Conversion relationship
Target = source × 3.28084

Example result

Converted quantity

3.28084 ft

SI base unit of length. Exactly 0.3048 meters.

How to interpret the result

The converted length represents the same entered physical quantity. Large or tiny values use the shared precision policy, and common rows retain the selected source and target directions.

Common m → ft conversions
Common m → ft conversions
mft
13.28084
1032.808399
100328.08399

How to use this calculator

  1. Enter the length quantity to convert.
  2. Select its named source unit and the target length unit.
  3. Convert, or swap units to examine the reverse length relationship and common values.

How it works

Formula

length target = length × source metre factor ÷ target metre factor.

Can I convert pixels as a physical length?

Only with a supplied pixel density. Use Pixels to Inches, which requires PPI rather than assuming pixels have a universal physical size.

What this calculator does

Compare physical lengths across metric and international foot, inch and mile units before using them in geometry.

Inputs you will need

Required or selected inputs

  • Source value
  • Source unit
  • Target unit

Assumptions

  • Physical length units use international foot, inch and mile definitions. All selected units represent the same linear dimension.

Limitations

  • Image pixels require separate PPI and stay in the dedicated pixel tool. This page does not infer screen density, map routes or area scaling.

Useful next steps

For a surface measurement, use squared-unit conversion in Area Converter.

References

NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

How should I read the length result?

The converted length represents the same entered physical quantity. Large or tiny values use the shared precision policy, and common rows retain the selected source and target directions.

Keep going