Converters / calculator
Area Converter
Convert square metres, square feet, square yards and square kilometres with squared length factors from the shared area registry.
Calculator
Calculator
Convert between selected units.
The quantity is already an area. Square units use the square of their corresponding physical length scale. This does not multiply room dimensions or apply material waste allowances. A linear conversion factor cannot substitute for its square.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Source value
- 1
- Source unit
- Square meter (m²)
- Target unit
- Square foot (ft²)
Calculation breakdown
area target = area × source square-metre factor ÷ target square-metre factor.
- Conversion relationship
- Target = source × 10.76391
Example result
Converted quantity
10.76391 ft²
SI unit of area. Area of a one-foot square.
How to interpret the result
The result changes the area unit only, keeping the measured area unchanged. Common rows show selected square-unit relationships; use Area Calculator for shape dimensions.
Common m² → ft² conversions
| m² | ft² |
|---|---|
| 1 | 10.76391 |
| 10 | 107.639104 |
| 100 | 1076.391042 |
How to use this calculator
- Enter the area quantity to convert.
- Select its named source unit and the target area unit.
- Convert, or swap units to examine the reverse area relationship and common values.
How it works
Formula
area target = area × source square-metre factor ÷ target square-metre factor.
Can I use the metre-to-foot multiplier for square metres?
No. Area scales by the square of the length factor. The shared area registry applies the correct squared relationship.
What this calculator does
Translate a surface measurement with squared length factors rather than the factor used for a single edge.
Inputs you will need
Required or selected inputs
- Source value
- Source unit
- Target unit
Assumptions
- The quantity is already an area. Square units use the square of their corresponding physical length scale.
Limitations
- This does not multiply room dimensions or apply material waste allowances. A linear conversion factor cannot substitute for its square.
Useful next steps
Calculate a rectangular room's floor area from its lengths first with Room area calculator.
References
NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
How should I read the area result?
The result changes the area unit only, keeping the measured area unchanged. Common rows show selected square-unit relationships; use Area Calculator for shape dimensions.
Keep going