Home & DIY / calculator

Brick calculator

Estimate bricks for one wall layer using wall size, openings, actual brick face dimensions, mortar joint, and waste. Supports metres and feet.

Calculator

Calculator

Estimate masonry for a wall.

Enter actual brick face dimensions, mortar joint, and total opening area. One layer is estimated by area.

Wall and masonry dimensions

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Unit system
Metric (m, m²)
Wall length (m)
5
Wall height (m)
2
Brick length (m)
0.215
Brick height (m)
0.065
Mortar joint (m)
0.01
Opening area (m²)
1
Waste (%)
10

Calculation breakdown

Net area = wall length × height − openings. Effective face = (brick length + joint) × (brick height + joint). Purchase pieces = ceil[net area ÷ effective face × (1 + waste ÷ 100)].

Wall area
10 m²
Net wall area
9 m²
Effective piece face with joint
0.017 m²
Base pieces
534

Example result

Purchase estimate including waste

587

Waste is applied before rounding up. Layout, bonds, corners, and wall thickness are excluded.

How to interpret the result

Net area = wall length × height − openings. Effective face = (brick length + joint) × (brick height + joint). Purchase pieces = ceil[net area ÷ effective face × (1 + waste ÷ 100)]. Brick bonds, boundary joints, corners, reinforcement, and multiple layers are excluded. Area counting approximates the layout, so this is not a masonry design.

How to use this calculator

  1. Select metres or feet and enter wall length, height, and combined opening area.
  2. Enter actual brick face length and height plus mortar joint thickness in the same unit.
  3. Set waste and calculate one layer; account for bonds and special pieces separately.

How it works

Formula

Net area = wall length × height − openings. Effective face = (brick length + joint) × (brick height + joint). Purchase pieces = ceil[net area ÷ effective face × (1 + waste ÷ 100)].

How many bricks do I need for a wall?

Divide net wall area by (brick length + joint) × (brick height + joint), add waste, and round up. Use actual brick faces: nominal modules can already include mortar. Bonds, edge joints, and multiple layers can change counts beyond this area estimate.

What this calculator does

Enter wall dimensions, actual brick face dimensions, mortar joint thickness, total openings, and waste for an area-based estimate.

Who this is useful for

People estimating a single wall layer from the actual brick face and mortar joint, rather than a generic bricks-per-area factor.

Inputs you will need

Required or selected inputs

  • Unit system
  • Wall length (m)
  • Wall height (m)
  • Brick length (m)
  • Brick height (m)
  • Mortar joint (m)
  • Opening area (m²)
  • Waste (%)

Assumptions

  • The wall is a rectangle with one layer. Actual brick dimensions exclude mortar; the joint is added to each face dimension.

Limitations

  • Brick bonds, boundary joints, corners, reinforcement, and multiple layers are excluded. Area counting approximates the layout, so this is not a masonry design.

Useful next steps

For concrete blocks with their own product dimensions, use Block calculator.

Estimate a separate wall footing volume with Concrete calculator.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Can I enter nominal brick sizes?

Use actual face dimensions excluding the joint. Entering a nominal module and then adding mortar would count the joint twice.

Keep going