Home & DIY / calculator

Block calculator

Estimate concrete blocks from wall size, openings, actual block face, mortar joints, and waste. Enter metres or feet for one wall layer.

Calculator

Calculator

Estimate concrete blocks.

Enter actual block face dimensions, not nominal module size. Mortar is added separately; one layer is estimated.

Wall and masonry dimensions

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Unit system
Metric (m, m²)
Wall length (m)
5
Wall height (m)
2
Block length (m)
0.39
Block height (m)
0.19
Mortar joint (m)
0.01
Opening area (m²)
1
Waste (%)
10

Calculation breakdown

Net area = wall length × height − openings. Effective block face = (block length + joint) × (block height + joint). Blocks = ceil[net area ÷ effective block face × (1 + waste ÷ 100)].

Wall area
10 m²
Net wall area
9 m²
Effective piece face with joint
0.08 m²
Base pieces
113

Example result

Purchase estimate including waste

124

Waste is applied before rounding up. Layout, bonds, corners, and wall thickness are excluded.

How to interpret the result

Net area = wall length × height − openings. Effective block face = (block length + joint) × (block height + joint). Blocks = ceil[net area ÷ effective block face × (1 + waste ÷ 100)]. Hollow cores, fill concrete, lintels, bond beams, piers, and special blocks are not counted. An area estimate does not describe wall strength or required reinforcement.

How to use this calculator

  1. Choose metres or feet and enter wall length, height, and total opening area.
  2. Enter actual block length and height excluding mortar, then add joint thickness and waste.
  3. Calculate one layer and count lintels, corners, bond beams, and special blocks separately.

How it works

Formula

Net area = wall length × height − openings. Effective block face = (block length + joint) × (block height + joint). Blocks = ceil[net area ÷ effective block face × (1 + waste ÷ 100)].

How many concrete blocks do I need?

Divide wall area minus openings by the block face including a joint on each dimension, then add waste and round up. Hollow cores and fill concrete are separate quantities. Actual block sizes vary; replace the starter dimensions with your product specification.

What this calculator does

Measure a wall and enter the actual length and height of a concrete block. Supply its mortar joint separately to estimate one block layer.

Who this is useful for

Masonry planners checking a preliminary whole-block quantity before working through corners, reinforcement and the wall bond.

Inputs you will need

Required or selected inputs

  • Unit system
  • Wall length (m)
  • Wall height (m)
  • Block length (m)
  • Block height (m)
  • Mortar joint (m)
  • Opening area (m²)
  • Waste (%)

Assumptions

  • One concrete-block layer is counted. The starter block is 0.39 × 0.19 m with a 0.01 m joint; replace these with your product sizes.

Limitations

  • Hollow cores, fill concrete, lintels, bond beams, piers, and special blocks are not counted. An area estimate does not describe wall strength or required reinforcement.

Useful next steps

For a brick layer with brick dimensions, use Brick calculator.

Estimate geometric footing volume separately with Concrete calculator.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Are block and brick dimensions interchangeable?

No. Enter the actual dimensions of your concrete blocks. Block defaults and labels are separate from the brick calculator.

Keep going