Math / calculator
Circle calculator
Calculate circle area, circumference, radius, and diameter from a known radius or diameter. Enter metres or feet for matching area units.
Calculator
Calculator
Calculate circle measurements.
Enter a radius or diameter in metres or feet. Results distinguish linear dimensions from square area.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Unit system
- Metric (m)
- Known measurement
- Radius
- Known length (m)
- 2
Calculation breakdown
Radius r = diameter ÷ 2 when diameter is supplied. Diameter = 2r. Circumference = 2πr. Area = πr².
- Radius
- 2 m
- Diameter
- 4 m
- Circumference
- 12.5664 m
Example result
Area
12.5664 m²
How to interpret the result
Radius r = diameter ÷ 2 when diameter is supplied. Diameter = 2r. Circumference = 2πr. Area = πr². Lengths must be from 0.000001 to 10,000 selected units. Displayed values are rounded to four decimal places, with scientific notation for very small results.
How to use this calculator
- Choose metres or feet and select radius or diameter.
- Enter the known length, remembering that diameter crosses the full circle through its centre.
- Calculate and read area in square units and circumference in length units.
How it works
Formula
Radius r = diameter ÷ 2 when diameter is supplied. Diameter = 2r. Circumference = 2πr. Area = πr².
What is the formula for circle area?
Circle area = πr², where r is the radius; circumference = 2πr. Diameter is twice the radius. Using diameter as radius makes the area four times too large, so select the measurement you actually know.
What this calculator does
Choose a known radius or diameter, enter it in metres or feet, and get the remaining linear measurements and circle area.
Who this is useful for
People who know one circle length and need the other dimensions or surface area for a drawing, measurement or study problem.
Inputs you will need
Required or selected inputs
- Unit system
- Known measurement
- Known length (m)
Assumptions
- The shape is an ideal circle. Internal geometry uses metres; square-unit conversions use squared linear factors.
Limitations
- Lengths must be from 0.000001 to 10,000 selected units. Displayed values are rounded to four decimal places, with scientific notation for very small results.
Useful next steps
Extend a circle into a right circular solid with Cylinder calculator.
For rectangular floor area, use Room area calculator.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Should I enter radius or diameter?
Select the measurement you know. Diameter spans the whole circle through its centre; radius is half that distance.
Keep going