Converters / calculator
Temperature Converter
Convert Celsius, Fahrenheit and Kelvin with affine offsets and absolute-zero validation, using the existing shared temperature engine.
Calculator
Calculator
Convert between selected units.
These are absolute temperature readings, not temperature differences. Kelvin zero is the absolute lower bound. Values below absolute zero are rejected. A Δ°C temperature difference requires only a scale change and is not modeled as an absolute reading.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Source value
- 1
- Source unit
- Degrees Celsius (°C)
- Target unit
- Degrees Fahrenheit (°F)
Calculation breakdown
Temperature units convert through Kelvin; Celsius/Fahrenheit relationships include a scale and offset rather than a ratio alone.
- Conversion relationship
- Target = source × 1.8 + (32)
Example result
Converted quantity
33.8 °F
Celsius temperature scale. Fahrenheit temperature scale.
How to interpret the result
The target reading includes the appropriate offset and refers to the same temperature. Negative Celsius or Fahrenheit can be valid; negative Kelvin or lower-than-absolute-zero inputs are rejected.
Common °C → °F conversions
| °C | °F |
|---|---|
| 1 | 33.8 |
| 10 | 50 |
| 100 | 212 |
How to use this calculator
- Enter the temperature quantity to convert.
- Select its named source unit and the target temperature unit.
- Convert, or swap units to examine the reverse temperature relationship and common values.
How it works
Formula
Temperature units convert through Kelvin; Celsius/Fahrenheit relationships include a scale and offset rather than a ratio alone.
Can I convert a temperature difference here?
This page converts absolute readings. Differences omit temperature offsets, so do not apply the absolute-reading formula to a difference.
What this calculator does
Translate a temperature between Celsius, Fahrenheit and Kelvin, keeping the scale offset in the calculation.
Inputs you will need
Required or selected inputs
- Source value
- Source unit
- Target unit
Assumptions
- These are absolute temperature readings, not temperature differences. Kelvin zero is the absolute lower bound.
Limitations
- Values below absolute zero are rejected. A Δ°C temperature difference requires only a scale change and is not modeled as an absolute reading.
Useful next steps
For a focused Celsius/Fahrenheit pair and common values, use Celsius to Fahrenheit.
References
NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
How should I read the temperature result?
The target reading includes the appropriate offset and refers to the same temperature. Negative Celsius or Fahrenheit can be valid; negative Kelvin or lower-than-absolute-zero inputs are rejected.
Keep going