Math / calculator

Surface Area Calculator

Calculate total closed surface area for cubes, rectangular prisms, cylinders, spheres and right circular cones with shape-specific lengths.

Calculator

Calculator

Calculate total surface area.

All lengths use the same unit; outputs are square units. Shapes are closed cube, rectangular prism, cylinder, sphere or right circular cone including the base.

Inputs and options

Radius for cylinder, sphere and cone; side for cube; length for prism.

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Shape
cube
Side / length / radius
3

Calculation breakdown

Cube=6s²; prism=2(lw+lh+wh); cylinder=2πr(r+h); sphere=4πr²; cone=πr(r+√(r²+h²)).

Example result

Total surface area

54 square units

How to interpret the result

The output counts the complete exterior of the chosen closed solid in square units. Check radius-versus-diameter and keep all dimensions in a common length unit.

How to use this calculator

  1. Select the solid whose outside area you need.
  2. Supply the side, dimensions or radius and perpendicular height displayed for that shape.
  3. Calculate the total including both cylinder ends or the cone base.

How it works

Formula

Cube=6s²; prism=2(lw+lh+wh); cylinder=2πr(r+h); sphere=4πr²; cone=πr(r+√(r²+h²)).

Does a cone include its base?

Yes. The result adds the circular base area to lateral area; the slant height is computed from the radius and perpendicular height.

What this calculator does

Choose a closed solid and total the area of its exterior faces, keeping surface coverage separate from capacity.

Inputs you will need

Some inputs appear only for the operation or shape you select.

Required or selected inputs

  • Shape
  • Side / length / radius — Radius for cylinder, sphere and cone; side for cube; length for prism.
  • Width / height
  • Prism height

Assumptions

  • Solids are ideal closed shapes. Cylinder and cone measurements use radius rather than diameter; cone height is perpendicular height.

Limitations

  • All lengths share one unit, producing square units. Dimensions are positive and limited to 10,000; open vessels and curved nonstandard solids are excluded.

Useful next steps

For rectangular capacity or fill quantity rather than exterior area, use Volume calculator.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

How should I read the surface area result?

The output counts the complete exterior of the chosen closed solid in square units. Check radius-versus-diameter and keep all dimensions in a common length unit.

Keep going