Converters / calculator

Pressure Converter

Translate Pa, bar and psi while retaining the same absolute or gauge reference. No ambient reference-pressure adjustment is inferred.

Calculator

Calculator

Convert between selected units.

Pressure units describe the same pressure reference; gauge and absolute measurements must not be interchanged without a separate reference. No altitude or ambient-pressure adjustment is performed. Named psi uses international pound-force at standard gravity.

Quantity and units

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Source value
1
Source unit
Pascal (Pa)
Target unit
Pound-force per square inch (psi)

Calculation breakdown

pressure to target = pressure × source canonical factor ÷ target canonical factor.

Conversion relationship
Target = source × 0.000145

Example result

Converted quantity

0.000145 psi

SI pressure: one newton per square metre. International pound-force at standard gravity per square inch.

How to interpret the result

Pa, bar and psi results represent the same entered pressure, using canonical pascals. The displayed relationship comes directly from the shared registry; it does not add a reference-pressure offset.

Common Pa → psi conversions
Common Pa → psi conversions
Papsi
10.000145
100.00145
1000.014504

How to use this calculator

  1. Enter the pressure quantity to convert.
  2. Select its named source unit and the target pressure unit.
  3. Convert, or swap units to examine the reverse pressure relationship and common values.

How it works

Formula

pressure to target = pressure × source canonical factor ÷ target canonical factor.

Can this turn gauge pressure into absolute pressure?

No. Unit conversion retains the reference; add the relevant ambient reference separately for a gauge-to-absolute calculation.

What this calculator does

Express the same pressure in pascals, bar or psi while preserving whether your measurement is gauge or absolute.

Inputs you will need

Required or selected inputs

  • Source value
  • Source unit
  • Target unit

Assumptions

  • Pressure units describe the same pressure reference; gauge and absolute measurements must not be interchanged without a separate reference.

Limitations

  • No altitude or ambient-pressure adjustment is performed. Named psi uses international pound-force at standard gravity.

Useful next steps

For a focused psi/bar conversion with a common-values table, use PSI to Bar.

References

NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

How should I read the pressure result?

Pa, bar and psi results represent the same entered pressure, using canonical pascals. The displayed relationship comes directly from the shared registry; it does not add a reference-pressure offset.

Keep going