Converters / utility
Newton-metres to Pound-feet
Convert newton-metres to pound-feet of torque and back. Uses pound-force definitions, common torque values and explicit unit guidance.
Calculator
Calculator
Convert the entered value.
Convert torque from newton-metres to pound-force feet. Retain the equipment manufacturer’s specification and rounding tolerance.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Value in N·m
- 100
- Conversion direction
- N·m → lbf·ft
Calculation breakdown
pound-force feet = newton-metres / 1.3558179483314004; newton-metres = pound-force feet × 1.3558179483314004. The factor comes from 0.45359237 kg × standard gravity 9.80665 m/s² × 0.3048 m.
- Entered quantity
- 100 N·m
Example result
Converted value (lbf·ft)
73.756215
Arithmetic retains full precision. Ordinary values show up to six decimal places, large values up to eight, and extremes use scientific notation.
How to interpret the result
Pound-force feet preserve the torque value; use the original specification’s tolerances when rounding.
Common conversions: N·m → lbf·ft
| N·m | lbf·ft |
|---|---|
| 1 | 0.737562 |
| 10 | 7.375621 |
| 25 | 18.439054 |
| 50 | 36.878107 |
| 100 | 73.756215 |
| 200 | 147.51243 |
| 500 | 368.781075 |
How to use this calculator
- Confirm that the source specification is torque in N·m.
- Enter its value and read lbf·ft after conversion.
- Reverse to translate a pound-foot torque specification back to N·m.
How it works
Formula
pound-force feet = newton-metres / 1.3558179483314004; newton-metres = pound-force feet × 1.3558179483314004. The factor comes from 0.45359237 kg × standard gravity 9.80665 m/s² × 0.3048 m.
How much is 100 N·m in pound-feet?
100 N·m is approximately 73.756215 lbf·ft.
What this calculator does
Enter torque in newton-metres to obtain pound-force feet. The output refers to torque, with a force acting over a lever arm.
Who this is useful for
Reading mechanical torque specifications in an alternate unit system.
Inputs you will need
Required or selected inputs
- Value in N·m
- Conversion direction
Assumptions
- A pound-foot means lbf·ft of torque, using the international foot.
- The value describes a moment of force rather than an energy quantity.
Limitations
- A torque wrench’s calibration and acceptable rounding are separate from conversion arithmetic.
- Do not confuse pound-feet with pound-inches, which differ by a factor of 12.
Useful next steps
To translate a pressure specification rather than a torque, use PSI to Bar.
For named torque and pressure unit selections, use Unit converter.
References
NIST: pressure and torque conversion factors — Pressure and torque factors use international length and mass definitions and conventional standard gravity. Unit conversion does not change a gauge/absolute pressure reference or certify equipment settings.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
Are newton-metres the same as joules?
Their dimensions match, but torque and energy are different quantities. This page converts torque labels and does not calculate work or energy.
Keep going