Home & DIY / calculator

Gravel calculator

Combine gravel sections or entered volumes, add an explicit allowance, and estimate metric tonnes or US short tons using editable density and supplier prices.

Calculator

Calculator

Estimate gravel volume and optional mass.

Add dimensions or direct volumes. Mass needs a supplier density. An additional-material allowance is separate from compaction, which is not modeled.

Measurements
Section 1
Allowance, density and prices

Blank means 0%. Added to geometric quantity; compaction is not inferred.

1600 kg/m³ is an illustrative midpoint of the supplier’s approximate 1500–1700 kg/m³ range, not a product specification. Confirm loose bulk density with your supplier.

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Enter sections by
Rectangular dimensions
Dimensions unit
m
Depth unit
cm
Direct volume unit
m³
Section name
Section
Internal length (m)
2
Internal width (m)
1
Unfilled depth (cm)
20
Bulk density assumption
No mass estimate
Package volume unit
L
Bulk price volume unit
m³
Bulk material price basis
Per selected bulk volume unit

Calculation breakdown

Geometric volume = sum(length × width × depth), or sum(direct section volumes). Purchasing volume = geometric volume × (1 + allowance/100). Mass kg = purchasing m³ × bulk density kg/m³. Metric tonnes = kg/1000; US short tons = kg/907.18474.

Geometric gravel volume
400 L / 0.4 m³ / 14.1259 ft³ / 0.5232 yd³
Allowance added
0 L / 0 m³ / 0 ft³ / 0 yd³

Example result

Purchasing gravel volume

400 L / 0.4 m³ / 14.1259 ft³ / 0.5232 yd³

How to interpret the result

Start with geometric and purchasing volumes. Mass is shown only with an explicit bulk density and distinguishes metric tonnes from US short tons; use supplier density when comparing weight-based prices.

Gravel sections
Gravel sections
SectionVolume
Section400 L / 0.4 m³ / 14.1259 ft³ / 0.5232 yd³

How to use this calculator

  1. Select dimensions or direct volumes and add project sections in your chosen units.
  2. Open optional purchasing settings to enter additional-material allowance, supplier density or an explicitly labeled example.
  3. Enter package or bulk prices with their volume or mass basis; calculate separate volume, mass and cost estimates.

How it works

Formula

Geometric volume = sum(length × width × depth), or sum(direct section volumes). Purchasing volume = geometric volume × (1 + allowance/100). Mass kg = purchasing m³ × bulk density kg/m³. Metric tonnes = kg/1000; US short tons = kg/907.18474.

Why do gravel tonnes depend on density?

One cubic metre is a volume. At an entered 1600 kg/m³, it corresponds to 1.6 metric tonnes, but grading, moisture and packing change the actual mass.

What this calculator does

Measure each gravel section or enter its volume directly. Start with a volume estimate, then add a loose bulk density only when you need a mass-based supplier quote.

Who this is useful for

Homeowners and landscapers estimating loose gravel volume for a rectangular path, bed, or base layer.

Inputs you will need

Required or selected inputs

  • Enter sections by
  • Dimensions unit
  • Depth unit
  • Direct volume unit
  • Section name
  • Internal length (m)
  • Internal width (m)
  • Unfilled depth (cm)
  • Bulk density assumption
  • Package volume unit
  • Bulk price volume unit
  • Bulk material price basis

Optional inputs

  • Additional material allowance (%) — Blank means 0%. Added to geometric quantity; compaction is not inferred.
  • Editable loose bulk density (kg/m³) — 1600 kg/m³ is an illustrative midpoint of the supplier’s approximate 1500–1700 kg/m³ range, not a product specification. Confirm loose bulk density with your supplier.
  • Package volume (L)
  • Price per package (your currency)
  • Price per selected bulk unit (your currency)

Assumptions

  • Density represents loose bulk material, including voids, not solid-rock particle density. The 1600 kg/m³ example is a midpoint of a supplier’s approximate 1500–1700 kg/m³ range.

Limitations

  • Compaction is not calculated. Additional allowance does not automatically model shrinkage, moisture or settlement. Density varies by product; confirm it with your supplier.

Useful next steps

Estimate separate gravel and sand layers for paving with Paver base calculator.

References

Heidelberg Materials: aggregate volume and bulk density — Supplier gives an approximate 1.5–1.7 metric tonnes per m³ aggregate range and advises asking your supplier. The optional 1600 kg/m³ example is an inferred midpoint, not a universal gravel or sand specification.

NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Are US tons and metric tonnes interchangeable?

No. A metric tonne is 1000 kg; a US short ton is 2000 lb, or 907.18474 kg. The calculator labels both distinctly.

Keep going