Technology / calculator
Horsepower Calculator
Convert mechanical horsepower, metric horsepower and watts, or estimate shaft power from explicit torque and revolutions per minute.
Calculator
Calculator
Convert horsepower or calculate shaft power.
Convert named mechanical/metric horsepower and watts, or calculate shaft power from torque and RPM. Mechanical hp is 550 ft·lbf/s; metric PS is 75 kgf·m/s.
Your result
Enter details to see the result.
Complete the inputs and calculate to see the main result and its supporting breakdown.
Example
Worked example
Example inputs
- Power mode
- Torque × angular speed
- Torque
- 100
- Torque unit
- Pound-force foot (lbf·ft)
- Rotational speed (RPM)
- 5252
- Result power standard
- Mechanical horsepower (550 ft·lbf/s) (hp (mechanical))
Calculation breakdown
Shaft P=torque(N·m)×2π×RPM/60; mechanical hp=550 ft·lbf/s; metric PS=75 kgf·m/s.
- Shaft / converted power
- 74,568.3810411617 W
Example result
Power in selected standard
99.9978461615 hp (mechanical)
Torque × RPM / 5252 is a rounded shortcut; this result uses exact unit definitions and 2π radians per turn.
How to interpret the result
Watts and the selected horsepower standard express the same power. The shaft mode fulfills Engine Horsepower on this page; it predicts mathematical shaft power, not measured wheel output.
How to use this calculator
- Choose conversion of a known power or torque-and-RPM shaft power.
- Select the source units and named mechanical hp, metric PS or watt output.
- Calculate the selected standard, keeping engine-loss assumptions separate.
How it works
Formula
Shaft P=torque(N·m)×2π×RPM/60; mechanical hp=550 ft·lbf/s; metric PS=75 kgf·m/s.
Why is my result slightly different from torque × RPM / 5252?
5252 is a rounded shortcut. This tool uses 2π radians per rotation and the exact mechanical horsepower definition rather than rounding that factor early.
What this calculator does
Compare named horsepower standards with watts, or derive shaft power from torque and rotation speed.
Inputs you will need
Some inputs appear only for the operation or shape you select.
Required or selected inputs
- Power mode
- Power
- Source power unit
- Torque
- Torque unit
- Rotational speed (RPM)
- Result power standard
Assumptions
- Torque and rotational speed are steady shaft magnitudes. Mechanical horsepower and metric horsepower are distinct named standards.
Limitations
- No engine efficiency, drivetrain loss or dynamometer correction is assumed. The familiar 5252 constant is a rounded mechanical-hp shortcut.
Useful next steps
For other power units without a torque/RPM calculation, use Power Converter.
References
NIST Guide to the SI: conversion factors — Reference definitions for length, area, volume, mass, and temperature. Kitchen US volumes use fractions of the US liquid gallon; metric cups and spoons are explicitly named in the tool.
See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.
Good to know
Frequently asked questions
How should I read the horsepower result?
Watts and the selected horsepower standard express the same power. The shaft mode fulfills Engine Horsepower on this page; it predicts mathematical shaft power, not measured wheel output.
Keep going