Home & DIY / calculator

Drywall calculator

Estimate drywall sheets from wall perimeter, height, openings, sheet dimensions, and waste. Use metres or feet; ceilings are excluded.

Calculator

Calculator

Estimate wall drywall sheets.

Use total wall perimeter, uniform height, total opening area, and actual sheet size. Ceiling area is excluded.

Walls and sheets

Your result

Enter details to see the result.

Complete the inputs and calculate to see the main result and its supporting breakdown.

Example

Worked example

Example inputs

Unit system
Metric (m, m²)
Wall perimeter (m)
18
Wall height (m)
2.4
Opening area (m²)
4
Sheet width (m)
1.2
Sheet height (m)
2.4
Waste (%)
10

Calculation breakdown

Gross wall area = perimeter × height. Net area = gross area − openings. Sheets = ceil[net area × (1 + waste ÷ 100) ÷ sheet area].

Gross wall area
43.2 m²
Opening area
4 m²
Net drywall area
39.2 m²
Area including waste
43.12 m²
Sheets before waste
14

Example result

Purchase estimate

15 sheets

Area estimate rounded up after waste; does not optimize sheet cuts.

How to interpret the result

Gross wall area = perimeter × height. Net area = gross area − openings. Sheets = ceil[net area × (1 + waste ÷ 100) ÷ sheet area]. Walls only: ceilings, partitions of different heights, sheet orientation, joints, fasteners, and cutting layouts are excluded. Confirm purchases with your installer.

How to use this calculator

  1. Choose metres or feet and enter wall perimeter and uniform height.
  2. Enter combined door and window area in square units, actual sheet dimensions, and waste.
  3. Calculate wall sheets, then review the cut layout and estimate ceilings separately.

How it works

Formula

Gross wall area = perimeter × height. Net area = gross area − openings. Sheets = ceil[net area × (1 + waste ÷ 100) ÷ sheet area].

How many drywall sheets do I need?

Subtract openings from perimeter × height, add waste, divide by one sheet's area, and round up. Area division does not plan sheet orientation or seams. Door cutouts may leave unusable offcuts, so subtracting openings does not guarantee the same saving in whole sheets.

What this calculator does

Measure total wall perimeter and a uniform wall height, subtract openings, and enter the dimensions of the sheets you will buy.

Who this is useful for

Renovators budgeting wall sheets from measured surfaces while leaving orientation, seams and ceiling coverage to a separate layout.

Inputs you will need

Required or selected inputs

  • Unit system
  • Wall perimeter (m)
  • Wall height (m)
  • Opening area (m²)
  • Sheet width (m)
  • Sheet height (m)
  • Waste (%)

Assumptions

  • All walls have the same height. Opening area is a total in square metres or square feet; sheet dimensions are actual sizes.

Limitations

  • Walls only: ceilings, partitions of different heights, sheet orientation, joints, fasteners, and cutting layouts are excluded. Confirm purchases with your installer.

Useful next steps

Estimate the paint finish for a room after installing sheets with Paint calculator.

For a wallpaper finish instead, use Wallpaper calculator.

See how HandyChest handles units, validation, rounding, and testing, or Report a problem with this calculator.

Good to know

Frequently asked questions

Should I subtract doors and windows?

Enter their combined area in Opening area. It cannot exceed gross wall area; cut reuse and layout may still require extra sheets.

Keep going